FUNMAT PRO 610 HT

The 300°C heated chamber super power

From PEEK to PEI, the FUNMAT PRO 610HT is a large 3D printer designed for high-performance materials. With its advanced thermal design and precise high-temperature, high-speed extrusion control technology, it has become the ideal choice for printing materials such as PEEK, PEEK-CF, PEEK-GF, PEKK, PEI9085, PEI1010, and PPSU.

300°C HEATED CHAMBER

Equipped with a uniformly heated chamber that can reach up to 300°C and a dual extruder capable of reaching 500°C, the FUNMAT PRO 610HT can print nearly all high-performance thermoplastic materials available on the market, ensuring superior print quality and enhanced mechanical properties of the printed parts.

Large-Scale Printing Capability

Due to its spacious build volume of 610 mm x 508 mm x 508 mm, the FUNMAT PRO 610HT enhances productivity by enabling the printing of larger parts without assembly and allowing the simultaneous production of multiple smaller parts.

Superior surface finish with dimensional accuracy

With a closed-loop servo control system and a high-precision ball screw drive (NO BELTS), the accuracy of movement positions is significantly enhanced (XY axis precision at 12.5 µm and Z axis precision at 1.25 µm), ensuring a remarkable surface finish at high printing speeds.

Dual nozzles print head

Dual nozzles with support material solutions provide high-quality surface finishes on complex geometries.

Water-soluble Support Materials

When printing complex geometries such as piping, where the support material is difficult to remove manually, water-soluble materials can be used to support the structure and dissolve in water, ensuring perfect printing quality.

Easy-to-Breakaway Support Material

The dual extruder design makes removing support material easy, without worrying about surface roughness at the contact surface from peeling.

Real-time data logging with INTAMQuality™ system

Traceability Built in. Real-time data logging with the INTAMQuality™ system. Full part tracking and material traceability. RFID-based INTAMSYS spool recognition. Quality validation from start to finish.

Compatible with Open-Sourced Material

INTAMSYS 3D printers are NOT locked to INTAM™ Filaments or any other brand. The printers can accept any 1.75 mm filament. This offers versatility and cost-effectiveness.

Add to quote