Sift 300 Sieve
€89.00 Excl. VAT
Product Description
During part extraction on the Fuse Sift, unsintered powder is dislodged and funneled into the sifter below the workspace. This 300 µm sieve filters out chunks or debris to keep the powder clean, while allowing powder flow with Nylon 11 CF Powder. The reclaimed powder can then be stored in a dedicated hopper until mixing with fresh powder for the next print. This is required for use with Nylon 11 CF Powder only (other SLS powders are compatible with the 150 µm sieve provided with Fuse Sift).
Clumps of nylon can accumulate in the mesh screen below the surface grate, eventually preventing reclaimed powder from passing through to be collected. Formlabs recommends replacing the sifter mesh after every 200 hours of use. For reference, the sifter automatically turns off after 30 minutes by default, so 200 hours of use represents at least 400 full sifting cycles.
Compatibility
Printer compatibility: Fuse 1, Fuse 1+ 30W
